Active Phased Array(능동 위상 배열)란 무엇입니까?
Active Phased Array 능동 위상 배열 - In this article, we synthesize overlapped apertures by segmenting active phased-arrays into subarrays that are multiplexed in time. [1] In this paper, a comprehensive characterization and calibration of a K-band large scale active phased-array antenna (APAA) that consists of 1024 (32×32) radiating elements based on a modular architecture is presented. [2] This paper presents a LTCC-based X- and Ku-band transmit/receive (TR) module for active phased arrays. [3] This paper presents two modifications of compressive sensing (CS)-based approach applied to the near-field diagnosis of active phased arrays. [4] While acoustic LWAs have been shown to achieve imaging resolution on par with active phased arrays, to date they have only been demonstrated for air-borne acoustic waves. [5] This article presents an integrated design of active phased array for low-altitude detection radar. [6]이 기사에서는 활성 위상 배열을 시간에 다중화되는 하위 배열로 분할하여 중첩 조리개를 합성합니다. [1] 이 논문에서는 모듈식 아키텍처를 기반으로 하는 1024(32×32) 방사 요소로 구성된 K-대역 대규모 능동 위상 배열 안테나(APAA)의 포괄적인 특성화 및 보정을 제시합니다. [2] 이 논문은 능동 위상 배열을 위한 LTCC 기반 X 및 Ku 대역 송수신(TR) 모듈을 제시합니다. [3] 이 논문은 능동 위상 배열의 근거리장 진단에 적용된 압축 감지(CS) 기반 접근 방식의 두 가지 수정 사항을 제시합니다. [4] 음향 LWA는 능동 위상 배열과 동등한 이미징 해상도를 달성하는 것으로 나타났지만 현재까지는 공기 중 음파에 대해서만 시연되었습니다. [5] 이 기사에서는 저고도 탐지 레이더를 위한 능동 위상 배열의 통합 설계를 제시합니다. [6]
active phased array antenna
Since our proposed dipole antenna has a simple structure, low fabrication cost and compatibility with the existing CMOS technology, we are convinced that it can be used properly in active phased array antenna, wireless communication, image processing and other millimeter-wave (mmW) applications. [1] PALSAR-3, the successor of PALSAR-2 onboard ALOS-2, is now designed as an active phased array antenna with on-board digital beam forming processor in order to increase the swath width of the 3m resolution Stripmap mode to 200 km. [2] In this paper, we report development results of an active phased array antenna (APAA)employing a highly integrated GaAs RF frontend module at 28 GHz-band. [3] 13~\mu \text{m}$ CMOS process for active phased array antenna was presented in this paper. [4] It employs an active phased array antenna composed of many dipole subarrays, several of which have been implemented and now are used for radio astronomy observations. [5] The concept of a multibeam active phased array antenna (APAA) control module building for communication systems is presented. [6] The large thermal deformation of the panel in active phased array antennas (APAAs) caused by the thermal power consumption of the internal devices and the change in the ambient temperature in actual operating conditions will result in a considerable decline in the electromagnetic (EM) performance of radar. [7] Modern requirements for the Active Phased Array Antenna (APAA) characteristics lead to the use of a large number of elements of an antenna array with each element of APAA corresponds to a receiving, transmitting or receiving-transmitting module. [8] In this paper, we investigate an octagonal phase settings algorithm for multiple kth elements in improving the calibration techniques for an active phased array antenna using the power measurement output of each element. [9] In an article the influence of active and passive interferences on the operation of active phased array antenna (APAA) of X-band radar are considered. [10] Index Terms-Active Phased Array Antenna, Vector-Sum Phase Shifters, SiGeBiCMOS integrated circuits. [11] In this paper a low cost/complexity modular architecture for electronically scanned active phased array antenna (A-PAA) for high throughput K/Ka-band mobile satellite communication (SATCOM) is presented. [12] In order to cut down the manufacturing cost of active phased array antenna, the number of T/R modules is drastically reduced. [13] The electromagnetic (EM) performance of active phased array antennas (APAAs) is significantly influenced by thermal deformation of the antenna panels caused by thermal power consumption and ambient temperature change. [14] In order to realize the active phased array antenna (APAA), three kinds of small size millimeter-wave GaN power amplifier (PA) MMICs are prototyped, and they are single-ended PA MMICs for high power and high linearity, respectively, and Doherty PA MMIC for high efficiency. [15] One way of downsizing the antenna length is to turn off the Transmit/Receive Modules (TRMs), which are connected to each antenna element of Active Phased Array Antenna (APAA). [16] The analysis of the antennas, which are ussually used in radar’s side lobes cancellation systems, is done, and active phased array antenna is chosen as an antenna of the radar’s side lobes cancellation system. [17] Increasing the cooling efficiency of T/R modules is an important problem in the process of designing active phased array antennas. [18]제안하는 다이폴 안테나는 구조가 간단하고 제조 비용이 저렴하며 기존 CMOS 기술과의 호환성을 가지고 있어 능동 위상 배열 안테나, 무선 통신, 영상 처리 및 기타 mmW(밀리미터파) 응용 분야에서 적절하게 사용할 수 있다고 확신합니다. . [1] PALSAR-2 온보드 ALOS-2의 후속 제품인 PALSAR-3은 이제 3m 해상도 스트립맵 모드의 폭을 200km로 늘리기 위해 온보드 디지털 빔 형성 프로세서가 있는 능동 위상 배열 안테나로 설계되었습니다. [2] 본 논문에서는 28GHz 대역에서 고집적 GaAs RF 프론트엔드 모듈을 채용한 능동 위상 배열 안테나(APAA)의 개발 결과를 보고한다. [3] 13~\mu \text{m}$ 능동 위상 배열 안테나를 위한 CMOS 공정이 본 논문에서 제시되었다. [4] 그것은 많은 쌍극자 하위 배열로 구성된 능동 위상 배열 안테나를 사용하며 그 중 일부는 구현되어 현재 전파 천문학 관측에 사용됩니다. [5] 통신 시스템을 위한 다중빔 능동 위상 배열 안테나(APAA) 제어 모듈 구축의 개념이 제시됩니다. [6] 능동 위상 배열 안테나(APAA)에서 패널의 큰 열 변형은 내부 장치의 열 소비 전력과 실제 작동 조건의 주변 온도 변화로 인해 발생하는 전자기(EM) 성능의 상당한 저하를 초래합니다. 레이더. [7] APAA(Active Phased Array Antenna) 특성에 대한 최신 요구 사항은 APAA의 각 요소가 수신, 전송 또는 수신-송신 모듈에 해당하는 안테나 어레이의 많은 요소를 사용하도록 합니다. [8] 본 논문에서는 각 요소의 전력 측정 출력을 이용하여 능동 위상 배열 안테나의 보정 기법을 개선하기 위해 다중 k번째 요소에 대한 8각형 위상 설정 알고리즘을 조사한다. [9] 한 기사에서는 X-밴드 레이더의 능동 위상 배열 안테나(APAA) 작동에 대한 능동 및 수동 간섭의 영향을 고려합니다. [10] 색인 용어 - 능동 위상 배열 안테나, 벡터 합 위상 시프터, SiGeBiCMOS 집적 회로. [11] 이 문서에서는 높은 처리량의 K/Ka 대역 이동 위성 통신(SATCOM)을 위한 전자 스캔 능동 위상 배열 안테나(A-PAA)를 위한 저비용/복잡성 모듈식 아키텍처를 제시합니다. [12] 능동 위상 배열 안테나의 제조 비용을 줄이기 위해 T/R 모듈의 수를 대폭 줄였습니다. [13] 능동 위상 배열 안테나(APAA)의 전자기(EM) 성능은 열 소비 전력과 주변 온도 변화로 인한 안테나 패널의 열 변형에 의해 크게 영향을 받습니다. [14] 능동위상배열안테나(APAA)를 구현하기 위해 소형 밀리미터파 GaN 전력증폭기(PA) MMIC 3종을 프로토타입으로 제작했으며, 각각 고출력 및 고선형성을 위한 단일 종단 PA MMIC이며, Doherty 고효율을 위한 PA MMIC. [15] 안테나 길이를 줄이는 한 가지 방법은 능동 위상 배열 안테나(APAA)의 각 안테나 요소에 연결된 송수신 모듈(TRM)을 끄는 것입니다. [16] 레이더의 사이드 로브 제거 시스템에서 일반적으로 사용되는 안테나에 대한 분석을 수행하고 능동 위상 배열 안테나를 레이더의 사이드 로브 제거 시스템의 안테나로 선택합니다. [17] 능동 위상 배열 안테나를 설계하는 과정에서 T/R 모듈의 냉각 효율을 높이는 것은 중요한 문제입니다. [18]
active phased array radar
As the important component of Active Phased Array Radar, the phase shift precision of transmit module has the important role on the performance of radar. [1] Active phased array radar is currently the development trend of radar system. [2] In the present work we report design and fabrication of High Speed printed Circuit Board (PCB) with Microvia and Embedded Resistors for the Design and Realization of Compact Dual Transmit/Receive Module Controller (DTRMC) card for active phased array Radar. [3] Based on the active phased array radar and the parameterized multipath channel model, the channel matrix estimation problem is transformed into the parameter estimation of the path directions and gains. [4] This paper presents an active phased array radar transmitter design using Injection-locking oscillators. [5] Active phased array radars for the atmospheric research have various advantages such as full beam agility in 360°, improved signal-to-noise ratio and improved sensitivity. [6] One of the important stages of creation of the digital active phased array radar is confirmation of its directional diagram characteristics. [7] The Active Antenna Array Unit of modern Active Phased Array Radars consists of Radiating elements, Transmit/Receive (T/R) Modules and associated RF & Digital electronics. [8] The antenna system of the active phased array radar is composed of parallel transmission and reception paths. [9]능동 위상 배열 레이더의 중요한 구성 요소로서 송신 모듈의 위상 변이 정밀도는 레이더 성능에 중요한 역할을 합니다. [1] 능동 위상 배열 레이더는 현재 레이더 시스템의 발전 추세입니다. [2] 현재 작업에서 우리는 능동 위상 배열 레이더를 위한 소형 이중 전송/수신 모듈 컨트롤러(DTRMC) 카드의 설계 및 구현을 위한 Microvia 및 내장 저항이 있는 고속 인쇄 회로 기판(PCB)의 설계 및 제조를 보고합니다. [3] 능동 위상 배열 레이더와 매개변수화된 다중 경로 채널 모델을 기반으로 채널 행렬 추정 문제는 경로 방향 및 이득의 매개변수 추정으로 변환됩니다. [4] 이 문서에서는 주입 잠금 발진기를 사용하는 능동 위상 배열 레이더 송신기 설계를 제시합니다. [5] 대기 연구를 위한 능동 위상 배열 레이더는 360°의 전체 빔 민첩성, 개선된 신호 대 잡음비 및 개선된 감도와 같은 다양한 이점을 가지고 있습니다. [6] 디지털 능동 위상배열 레이더 생성의 중요한 단계 중 하나는 방향도 특성을 확인하는 것입니다. [7] 최신 능동 위상 배열 레이더의 능동 안테나 배열 장치는 방사 요소, 전송/수신(T/R) 모듈 및 관련 RF 및 디지털 전자 장치로 구성됩니다. [8] 능동 위상 배열 레이더의 안테나 시스템은 병렬 전송 및 수신 경로로 구성됩니다. [9]