Acrylamide Polymer(아크릴아미드 폴리머)란 무엇입니까?
Acrylamide Polymer 아크릴아미드 폴리머 - Single-phase displacement experiments were performed at reservoir conditions using polyacrylamide polymers and representative reservoir brines and core samples. [1] This study aims at evaluating the self-assembly of kraft lignin-acrylamide polymers in aqueous environments under different salt concentrations. [2] Determination of the SO42- concentration in an individual rain droplet was achieved by precipitate production in synthesized acrylamide polymer gel. [3] The technique consists in injecting Hydrolyzed Polyacrylamide polymer (HPAM), mixed with water, in the reservoir to reach a target viscosity, in order to guarantee oil extraction, while reducing a bit the water cut. [4] Fouling experiments are performed with three different types of foulants: polystyrene particle solution (colloidal fouling), polyacrylamide polymer solution (organic fouling) and a mixture of these two solutions (combined fouling). [5] In this study, a high-molecular-weight modified polyacrylamide polymer (GF-1) encapsulated in a water-in-oil emulsion is proposed for controlled polymer release towards enhanced oil recovery. [6] This modeling approach is based on population balances of generating functions and, besides the crosslinking mechanisms inherent to network formation, other specific kinetic steps important in acrylamide polymerization (e. [7] Normoxic N-(isobutoxymethyl)acrylamide polymer gel (NIBMAGAT) dosimeters have been prepared in deionized water with acetone as a co-solvent for radiotherapy with very low levels of turbidity. [8] Herein, silica nanoparticles were synthesized and chemically modified with iminodiacetic acid (IDA) and Ni2+ ions surrounded by a bis-acrylamide polymeric shell to obtain a new core–shell immobilized metal affinity chromatography (IMAC) based material. [9] The major motivation to use an associative polymer was to make use of its superior in-situ viscosifying performance compared to regular polyacrylamide polymer (HPAM). [10] Copolymers of acrylamide with the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid—known as sulfonated polyacrylamide polymers—had been shown to produce very promising results in the enhancement of oil recovery, particularly in polymer flooding. [11] In this paper, a facile approach was developed for highly effective oil/water separation by incorporating of the dimethyldiallylammonium chloride acrylamide polymer (P(AM-DMDAAC)) into graphene aerogels. [12] The reaction and integration of the modified strands with acrylamide polymers was evidenced by gel electrophoresis. [13] The sorption properties of gadolinium (Gd) by an original carbamoylmethylphosphonate (cmp)-based acrylamide polymer combining both chelating and thermosensitive properties namely poly(diethyl-6-(acrylamido)hexylcarbamoyl-methylphosphonate) (P(CPAAm6C)) are presented for the first time. [14] In the present study, a novel kind of colorless Zr(IV)‐crosslinked polyacrylamide/polyanionic cellulose (PAM/PAC) composite hydrogel with unique acid resistance was constructed via acrylamide polymerization in a PAC solution, followed by posttreatment in a zirconium oxychloride (ZrOCl₂) solution. [15] This research investigates the effect of the hydrodynamic retention for low and high molecular weight (AN 113 VLM and AN 113 VHM) sulfonated polyacrylamide polymer. [16] In this study, the effects of two stabilizers (anionic polyacrylamide polymer and vegetable-based mulch) for reducing soil loss at four levels of concentration (0, 15%, 30%, and 60%) on three kinds of soils in western Khuzestan, Iran have been studied. [17] Reversibility and repeatability of the tensile deformation response in holographic sensors formed by highly stretchable acrylamide polymers have been investigated. [18] Herein, an irregular rod-like composite membrane was prepared through 3-aminopropyltriethoxysilane (APTES) modification, followed by acrylamide polymerization with atomic transfer radical polymerization (ATRP). [19] However, the efficiency of oilfield acrylamide polymer in reservoirs is limited because of saline brines and temperature conditions. [20] Single phase polycrystalline DyMnO3 (DMO) was synthesized using acrylamide polymer gel template method. [21] A matrix metalloproteinases (MMPs)-sensitive peptide (PVGLIGK) was introduced to cross-link the N-(2-hydroxypropyl) methylacrylamide polymer-doxorubicin conjugates (HPMA-Dox) conjugate to construct a nano-size polymeric nanocarrier-Dox assembly (PMD) with a molecular weight (MW) of 73 kDa and this modification has resulted in a prolonged circulation time (a half-time of 20. [22] The combination of vertically-oriented graphene nanosheet electrodes and a hydroxide ion-conducting tetraethylammonium hydroxide-polyacrylamide polymer electrolyte enabled an interdigitated planar EC with capacitive behaviour at rates up to 1000 V s−1 and a response time of less than 1 ms. [23] The non-Newtonian fluid was a homogeneous solution of 90 part per million of a polyacrylamide polymer in water with 66% drag reduction. [24] The radiation sensitivity of PGO-PVB (PGO-P) dosimeter is comparable with Fricke gel and higher than N-(Isobutoxymethyl) acrylamide polymer gel dosimeters. [25]단상 변위 실험은 폴리아크릴아미드 폴리머와 대표적인 저수지 염수 및 코어 샘플을 사용하여 저수지 조건에서 수행되었습니다. [1] 이 연구는 다양한 염 농도에서 수성 환경에서 크래프트 리그닌-아크릴아미드 중합체의 자가 조립을 평가하는 것을 목표로 합니다. [2] 개별 빗방울의 SO42 농도 측정은 합성된 아크릴아미드 폴리머 겔에서 침전물 생성에 의해 달성되었습니다. [3] 이 기술은 물과 혼합된 Hydrolyzed Polyacrylamide polymer(HPAM)를 저장소에 주입하여 목표 점도에 도달하여 오일 추출을 보장하고 물 절단을 약간 줄이는 것으로 구성됩니다. [4] 오염 실험은 폴리스티렌 입자 용액(콜로이드 오염), 폴리아크릴아미드 폴리머 용액(유기 오염) 및 이 두 용액의 혼합물(결합된 오염)의 세 가지 다른 유형의 오염으로 수행됩니다. [5] 이 연구에서는 유중수 에멀젼에 캡슐화된 고분자량 변형 폴리아크릴아미드 중합체(GF-1)가 향상된 오일 회수를 위한 제어된 중합체 방출을 위해 제안되었습니다. [6] 이 모델링 접근 방식은 생성 기능의 인구 균형 및 네트워크 형성에 고유한 가교 메커니즘 외에도 아크릴아미드 중합에 중요한 기타 특정 운동 단계(예: [7] Normoxic N-(isobutoxymethyl)acrylamide polymer gel(NIBMAGAT) 선량계는 매우 낮은 탁도 수준의 방사선 치료를 위한 공용매로 아세톤과 함께 탈이온수에서 준비되었습니다. [8] 여기에서 실리카 나노입자를 합성하고 비스-아크릴아미드 고분자 쉘로 둘러싸인 이미노디아세트산(IDA)과 Ni2+ 이온으로 화학적으로 개질하여 새로운 코어-쉘 고정 금속 친화성 크로마토그래피(IMAC) 기반 물질을 얻었다. [9] 회합성 폴리머를 사용하는 주요 동기는 일반 폴리아크릴아미드 폴리머(HPAM)에 비해 우수한 현장 점성 성능을 활용하는 것이었습니다. [10] 술폰화된 폴리아크릴아미드 중합체로 알려진 2-아크릴아미도-2-메틸프로판 술폰산의 나트륨 염과 아크릴아미드의 공중합체는 특히 중합체 범람에서 오일 회수 향상에 매우 유망한 결과를 생성하는 것으로 나타났습니다. [11] 이 논문에서는 디메틸디알릴암모늄 클로라이드 아크릴아미드 폴리머(P(AM-DMDAAC))를 그래핀 에어로겔에 통합하여 매우 효과적인 오일/물 분리를 위한 손쉬운 접근 방식을 개발했습니다. [12] 변형된 가닥과 아크릴아미드 중합체의 반응 및 통합은 겔 전기영동에 의해 입증되었습니다. [13] 킬레이트화 및 열감응 특성, 즉 폴리(디에틸-6-(아크릴아미도)헥실카르바모일-메틸포스포네이트)(P(CPAAm6C))를 결합한 원래의 carbamoylmethylphosphonate(cmp) 기반 아크릴아미드 중합체에 의한 가돌리늄(Gd)의 흡착 특성이 첫 번째로 제시됩니다. 시각. [14] 본 연구에서는 PAC 용액에서 아크릴아미드 중합 후 지르코늄 옥시클로라이드(ZrOCl₂)에서 후처리하여 독특한 내산성을 지닌 새로운 종류의 무색 Zr(IV) 가교 폴리아크릴아미드/다이온성 셀룰로오스(PAM/PAC) 복합 하이드로겔을 제작했습니다. ) 해결책. [15] 이 연구는 저분자량 및 고분자량(AN 113 VLM 및 AN 113 VHM) 설폰화된 폴리아크릴아미드 중합체에 대한 유체역학적 보유 효과를 조사합니다. [16] 본 연구에서는 서부 Khuzestan의 3가지 토양에 대한 4가지 농도(0, 15%, 30%, 60%)의 토양 손실을 줄이기 위한 두 가지 안정제(음이온성 폴리아크릴아미드 폴리머 및 식물성 뿌리 덮개)의 효과, 이란이 연구되었습니다. [17] 신축성이 높은 아크릴아마이드 폴리머로 형성된 홀로그램 센서에서 인장 변형 응답의 가역성과 반복성이 조사되었습니다. [18] 여기서, 3-아미노프로필트리에톡시실란(APTES) 변형 후, 원자이동 라디칼 중합(ATRP)을 통한 아크릴아미드 중합을 통해 불규칙한 막대형 복합막을 제조하였다. [19] 그러나 저장고에서 유전 아크릴아미드 중합체의 효율성은 염수 및 온도 조건으로 인해 제한됩니다. [20] 단상 다결정 DyMnO3(DMO)는 아크릴아미드 폴리머 겔 템플릿 방법을 사용하여 합성되었습니다. [21] N-(2-hydroxypropyl) methylacrylamide polymer-doxorubicin conjugates(HPMA-Dox) 접합체를 가교하기 위해 Matrix Metalloproteinases(MMPs)에 민감한 펩타이드(PVGLIGK)를 도입하여 나노 크기의 고분자 나노운반체-Dox 어셈블리(PMD)를 구성했습니다. )의 분자량(MW)이 73kDa이고 이러한 변형으로 인해 순환 시간이 연장되었습니다(반감기는 20. [22] 수직 방향의 그래핀 나노시트 전극과 수산화물 이온 전도성 테트라에틸암모늄 하이드록사이드-폴리아크릴아미드 고분자 전해질의 조합은 최대 1000Vs-1의 속도와 1ms 미만의 응답 시간에서 정전용량 거동을 가진 맞물린 평면 EC를 가능하게 했습니다. [23] 비뉴턴 유체는 66% 항력 감소와 함께 물에 90ppm의 폴리아크릴아미드 중합체의 균질한 용액이었습니다. [24] PGO-PVB(PGO-P) 선량계의 방사선 민감도는 Fricke 겔과 비슷하고 N-(Isobutoxymethyl) 아크릴아미드 폴리머 겔 선량계보다 높습니다. [25]
acrylamide polymer gel
Determination of the SO42- concentration in an individual rain droplet was achieved by precipitate production in synthesized acrylamide polymer gel. [1] Normoxic N-(isobutoxymethyl)acrylamide polymer gel (NIBMAGAT) dosimeters have been prepared in deionized water with acetone as a co-solvent for radiotherapy with very low levels of turbidity. [2] Single phase polycrystalline DyMnO3 (DMO) was synthesized using acrylamide polymer gel template method. [3] The radiation sensitivity of PGO-PVB (PGO-P) dosimeter is comparable with Fricke gel and higher than N-(Isobutoxymethyl) acrylamide polymer gel dosimeters. [4]개별 빗방울의 SO42 농도 측정은 합성된 아크릴아미드 폴리머 겔에서 침전물 생성에 의해 달성되었습니다. [1] Normoxic N-(isobutoxymethyl)acrylamide polymer gel(NIBMAGAT) 선량계는 매우 낮은 탁도 수준의 방사선 치료를 위한 공용매로 아세톤과 함께 탈이온수에서 준비되었습니다. [2] 단상 다결정 DyMnO3(DMO)는 아크릴아미드 폴리머 겔 템플릿 방법을 사용하여 합성되었습니다. [3] PGO-PVB(PGO-P) 선량계의 방사선 민감도는 Fricke 겔과 비슷하고 N-(Isobutoxymethyl) 아크릴아미드 폴리머 겔 선량계보다 높습니다. [4]