Introduction to Politecnico Di

An extensive experimental programme was carried out in a collaboration between Politecnico di Milano and Universitat Politècnica de Catalunya.

The simulation model of NCT-WES was experimentally verified by exposing the prototype in the reference neutron field of 241Am-Be available at the Politecnico di Milano.

The joint experimental programme, carried out at the Politecnico di Milano and at the Universitat Politècnica de Catalunya, included the flexural characterization of four shallow beams (1.

—<italic>Marcelo Lubaszewki, Universidade Federal do Rio Grande do Sul</italic> —<italic>Matteo Sonza Reorda, Politecnico di Torino</italic>.

How visualizations are created? How data becomes meaningful? What does it mean that visualizations are knowledge tools? What is the design practice of a research lab in visualization? Professor Paolo Ciuccarelli talks in this interview about the ten years of experience of DensityDesign, a research lab at Politecnico di Milano devoted to the visual representation of complexity through the production of diagrams that offer visual narratives and analytics of social, organizational, and urban phenomena.

Eleonora Arnone, Politecnico di Milano Italy * Louis Aslett, Durham U.

In this context, a test facility will be built in the university campus of Politecnico di Torino (Italy).

Anwar Ali, from Politecnico di Torino, Italy.

) Group, from Politecnico di Milano - Polo di Mantova that has been carrying out research and consulting activities with institutions related to Italian Heritage since 2000.

This manual, currently under development, is created within a research funded by the Department of Architecture and Urban Studies of the Politecnico di Milano and is an integral part of an experimental game aimed at supporting students in the development of local self-sustainability scenarios.

The Fast REactor NEutronics/Thermal-hydraulICs (FRENETIC) code has been developed during the last years at Politecnico di Torino, implementing a full-core coupled neutronic/thermal-hydraulics model for steady-state and transient analysis of liquid-metal cooled fast breeder reactor (LMFBR).

Experimental tests were performed at the DYNLab at Politecnico di Torino (Italy).

Sukhorukov 2, † Research School of Physics, Australian National University, Canberra, ACT 2601, Australia ARC Centre of Excellence for Transformative Meta-Optical Systems (TMOS), Australia Dipartimento di Fisica, Politecnico di Milano, Milan, Italy ITMO University, 49 Kronverksky Pr.

This article introduces a strong-motion dataset of near-source broadband earthquake ground motions from 3D physics-based numerical simulations—named BB-SPEEDset—obtained by the code SPEED (SPectral Elements in Elastodynamics with Discontinuous Galerkin)—developed at Politecnico di Milano, Italy.

This work is devoted to investigating some relevant issues encountered in the Edited and reviewed by: Alberto Corigliano, Politecnico di Milano, Italy.

First short campaigns will be carried out by specialized Buzzi Unicem operators (assisted by CLEANKER partners such as, Politecnico di Milano, Laboratorio Energia e Ambiente Piacenza, IKN, University of Stuttgart and VDZ) to test the process performances as a function of the type of raw meal, the amount of sorbent (solid to gas ratio in the carbonator) and the carbonation/calcination operating temperatures.

We implemented two AP Connectors, named AP-Proxy and AP-OAuth2, integrated with the Italian pre-production eIDAS node to get additional attributes from the Politecnico di Torino university backend.

(*) Dipartimento di Chimica, Materiali e Ingegneria Chimica ‘‘Giulio Natta’’, Politecnico di Milano, Italy.

The project, coordinated by Politecnico di Milano, aims to reconstruct the Gahayr campus of the Somali National University of Mogadishu, which is today almost destroyed due to the civil war.

Corinna Rossi , 2 * Sara Rabie 1 Department of Architecture and Urban Design, Faculty of Architecture, Politecnico di Milano Cairo, Milan, Italy 2 Department of Architecture and Urban Design, Faculty of Architecture, German University in Cairo, Cairo, Egypt 1 E-mail: corinna.

Giacomo Fiocco,a,b Claudia Invernizzi,a,c Tommaso Rovetta,a Michela Albano,a,d Marco Malagodi,a,e Patrizia Davitb and Monica Gulminib Laboratorio Arvedi di Diagnostica Non Invasiva, CISRiC, Università degli Studi di Pavia, Via Bell’Aspa 3, 26100 Cremona, Italy Dipartimento di Chimica, Università di Torino, Via Pietro Giuria 7, 10125, Torino, Italy Dipartimento di Scienze Matematiche, Fisiche e Informatiche, Università degli Studi di Parma, Parco Area delle Scienze, 7/A, 43124 Parma, Italy Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133, Milano, Italy Dipartimento di Musicologia e Beni Culturali, Università degli Studi di Pavia, Corso Garibaldi 178, 26100 Cremona, Italy.

The detailed comparison with experimental data of the same models, tested in the large-scale wind tunnel of the Politecnico di Milano, suggests the very good predictive capability of the code in terms of power exchange, torque coefficient, and loads, on both time-mean and time-resolved basis.

Marco Arlotti, Stefania Cerea & Costanzo Ranci (Politecnico di Milano).

The method was applied on a Department of Politecnico di Milano.

For this reason, this study is a collaboration between a company (ENGIE Italia), the University of Perugia and the Politecnico di Torino.

Among others, the researchers at Politecnico di Torino are developing a novel platform to enhance the performance offered by present-day issues, and to assess many others which were not even taken into consideration before they have been highlighted by the pandemic emergency currently in progress.

This paper describes the project of an optical measurement system, an evolution of the system currently installed on the lathe for turbine palettes refinement in Ansaldo Energie, developed by the Politecnico di Milano.

We comment about the “Big Data Journey” status in Italy reported by Osservatorio Politecnico di Milano.

Onorato2 1)Dipartimento di Meccanica, Matematica e Management, Politecnico di Bari, Via Re David 200 – 70125 Bari, Italy 2)Dipartimento di Fisica, Università degli Studi di Torino, Via Pietro Giuria 1, 10125 Torino, Italy 3)DISAT, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.

INFN MAGIC Group: INFN Sezione di Bari and Dipartimento Interateneo di Fisica dell’Università e del Politecnico di Bari,I-70125, Bari, Italy Finnish MAGIC Group: Finnish Centre for Astronomy with ESO, University of Turku,FI-20014 Turku, Finland Ruhr University Bochum, Universitätsstraße 150, D-44801 Bochum, Germany INAF Istituto di Radioastronomia, I-40129 Bologna, Italy ETH Zürich,CH-8093 Zürich, Switzerland 5 Department of Physics and Astronomy, University of Turku,FI-20014 Turku, Finland INFN Sezione di Perugia,I-06123 Perugia, Italy E-mail: serena.

This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano.

This special issue of the Journal of Small Business Management builds on the proceedings of the Third Entrepreneurial Finance conference that was held in Milan (Italy) in June 2018, hosted by the School of Management of Politecnico di Milano.

This was the first case study to develop a proper GDPR compliant approach and DPIA so that it was adopted ad best practice among all projects in this Politecnico di Milano university and shared among other consortia.

—<italic>Marcelo Lubaszewki, Universidade Federal do Rio Grande do Sul</italic> —<italic>Matteo Sonza Reorda, Politecnico di Torino</italic>.

This article describes in detail an experimental testbed (consisting of the interconnection of two real-time simulators, located at Politecnico di Torino and Politecnico di Bari, at a geographical distance of 1000 km) in order to perform remote power hardware-in-the-loop experiments.

it (Camilla Colombo) 1Present address: Politecnico di Milano, Via La Masa 34, 20156, Milano, Italy 2Accepted for publication in the Journal of Space Safety Engineering.

Dipartimento di Fisica, Politecnico di Milano, via G.

This article explores the impacts produced on a Challenge-Based Innovation project work carried out in the context of a program developed by Politecnico di Milano and Politecnico di Torino.

1 Laboratory for Engineering of the Neuromuscular System (LISiN), Department of Electronic Engineering and Telecommunications, Politecnico di Torino, Turin, Italy, 2 LAM Motion Analysis Laboratory, Correggio, Neuromotor and Rehabilitation Department, Azienda Unita’ Sanitaria Locale, Istituto di Ricerca e Cura a Carattere Scientifico di Reggio Emilia, Reggio Emilia, Italy, 3 Shirley Ryan Ability Lab, Single Motor Unit Laboratory, Chicago, IL, United States, Department of Rehabilitation and Prevention Engineering, Institute of Applied Medical Engineering, Rheinisch-Westfälische Technische Hochschule Aachen University, Aachen, Germany.

Riccardo Arpaia ∗ and Giacomo Ghiringhelli 3, † Quantum Device Physics Laboratory, Department of Microtechnology and Nanoscience, Chalmers University of Technology, SE-41296 Göteborg, Sweden Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, I-20133 Milano, Italy CNR-SPIN, Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, I-20133 Milano (Dated: June 3, 2021).

A three-step educational procedure based on the PBL approach, applied at the atelier “Heritage Preservation and Enhancement” of the Politecnico di Torino, is presented.

0 research laboratory hosted by Politecnico di Milano, and comprises seven assembly stations, each with their programmable logic controllers and human-computer interfaces, as well as an industrial robotic arm that performs pick-and-place tasks.

STEFAN WAGNER, University of Stuttgart, Germany DANIEL MÉNDEZ FERNÁNDEZ, Technical University of Munich, Germany MICHAEL FELDERER, University of Innsbruck, Austria and Blekinge Institute of Technology, Sweden ANTONIO VETRÒ, Nexa Center for Internet & Society, DAUIN, Politecnico di Torino, Italy MARCOS KALINOWSKI, Pontifical Catholic University of Rio de Janeiro, Brazil ROEL WIERINGA, University of Twente, The Netherlands DIETMAR PFAHL, University of Tartu, Estonia TAYANA CONTE, Universidade Federal do Amazonas, Brazil MARIE-THERESE CHRISTIANSSON, Karlstads Universitet, Sweden DESMOND GREER, Queen’s University Belfast, UK CASPER LASSENIUS, Aalto University, Finland TOMI MÄNNISTÖ, University of Helsinki, Finland MALEKNAZ NAYEBI, University of Calgary, Canada MARKKU OIVO, University of Oulu, Finland BIRGIT PENZENSTADLER, California State University, Long Beach, USA RAFAEL PRIKLADNICKI, Pontifícia Universidade Católica do Rio Grande do Sul, Brazil GUENTHER RUHE, University of Calgary, Canada ANDRÉ SCHEKELMANN, Hochschule Niederrhein, Germany SAGAR SEN, Simula, Norway RODRIGO SPÍNOLA, Salvador University UNIFACS, Brazil AHMED TUZCU, zeb.

Luca Vigano, MD, PhD , Martina Sollini, MD, PhD, Francesca Ieva, PhD, Francesco Fiz, MD, and Guido Torzilli, MD, PhD Division of Hepatobiliary and General Surgery, Department of Surgery, IRCCS Humanitas Research Hospital, Rozzano, Milan, Italy; Department of Nuclear Medicine, IRCCS Humanitas Research Hospital, Rozzano, Milan, Italy; Department of Biomedical Sciences, Humanitas University, Pieve Emanuele, Milan, Italy; MOX laboratory, Department of Mathematics, Politecnico di Milano, Milan, Italy; CADS Center for Analysis, Decisions and Society, Human Technopole, Milan, Italy.

Politecnico di Milano, Dipartimento di Elettronica, Informazione e Bioingegneria, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.

Merlin” dell’Università e del Politecnico di Bari, via Amendola 173, I-70126 Bari, Italy 8 Istituto Nazionale di Fisica Nucleare, Sezione di Bari, I-70126 Bari, Italy 9 W.

The members of the IDEA League with a strong research profile in geothermal energy, TU Delft (The Netherlands), RWTH Aachen (Germany), ETH Zurich (Switzerland) and Politecnico di Milano (Italy), constitute the academic consortium of EASYGO.

The railway research group of the Politecnico di Torino has been working for years on the development of solutions to effectively monitor the operating conditions of passenger and freight rail vehicles.

Optimization of Hybrid Rocket Engines at Politecnico di Torino began in the 1990s.

Merlin”, dell’Università e del Politecnico di Bari via Amendola 173, I-70126 Bari, Italy Currently at The Oskar Klein Centre, Department of Physics, Stockholm University AlbaNova SE-10691 Stockholm, Sweden 13 Passage Hamo, CH-1262 EYSINS, Switzerland Istituto Nazionale di Fisica Nucleare, Sezione di Milano Via Celoria,16, 20133 Milano, Italy Institute for Astroparticle Physics (IAP), Karlsruhe Institute of Technology (KIT) P.

5 Department of Physics, Massachusetts Institute of Technology, 77 Mass Av, 02139, Cambridge, MA, US 6 Dipartimento di Elettronica e Telecomunicazioni, Politecnico di Torino, 10128 Torino TO, Italy Office of Innovation, New York University Tandon School of Engineering, Six MetroTech Center, Brooklyn NY 11201, US.

The activity involves several partners, such as Politecnico di Milano, Sapienza Università di Roma, Instituto de Telecomunicações-Aveiro Pole, and Thales Alenia Space - Italia.

The workshop features presentations of accepted contributions to the RecSys Challenge 2021, organized by Politecnico di Bari, ETH Zürich, Jönköping University, and the data set is provided by Twitter.

One of the procedures was carried out at the Fluid Power Research Laboratory of the Politecnico di Torino, while the other approach was developed at the University of Parma.

La investigación propuesta se centra en el contexto museístico de la ciudad de Turín (Italia), dentro de un acuerdo marco en curso entre el Politecnico di Torino y el Museo de Arte Oriental (MAO).

of Electrical and Information Engineering (DEI), Politecnico di Bari, Bari (Italy) and CNIT, Consorzio Nazionale Interuniversitario per le Telecomunicazioni E-mail: {domenico.

A prototype system for the deposition of continuous carbon fiber-reinforced polymers with a thermoplastic matrix has been recently developed at Mechanical Engineering Department of Politecnico di Milano.

it/ 2021/ 04/ 14/ aircr aftimpactdynam ics/ • Navid Zobeiry, University of Washington, Marco Petrolo, Politecnico di Torino—Composite materials: modeling, processing, and characterization—12 h—8–11 June 2021 • Adriano Calvi, ESA—Structural dynamics: theory and practice in the space industry—8 h—29–30 June 2021 • Lorenzo Olivieri, Università di Padova—An overview on space debris protection best practices—4 h—June 2021 • Calogero Orlando and Stefano Valvano, Università Enna Kore—Sound transmission control through optimized composite sandwich lattice panels—8 h—8–15–22—29 October 2021 • Alessio Aboudan, Università di Padova—Planetary probes entry and descent science—4 h—September/ October 2021 • Daniele Pavarin, Università di Padova, Francesco Barato and Elena Toson, T4i, TECHNOLOGY FOR PROPULSION AND INNOVATION SPA—Innovative propulsion system in service of small satellites—4 h—September/ December 2021 • Carlo Bettanini, Università di Padova—Introduction to the design of LEO nanosatellite orbits for local coverage—4 h—November 2021 • Andrea Alaimo and Antonio Esposito, Università Enna Kore—Full flight simulator: testing and research platform—8 h—3–10—15–20 December 2021 • Alfonso Pagani, Politecnico di Torino—Challenges and opportunities for the aerospace frontier research offered by the ERC and the MSCA program—4 h—February 2022.

Focusing on the lecture titled “Le teorie della progettazione (The Theories of the Project) “, the paper detects theoretical origin of tendenza during the years when Rossi taught in Politecnico di Milano as professor.

Dipartimento di Ingegneria Civile e Ambientale (DICA), Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.

With Kind Regards Paolo Vigo, Università di Napoli “Parthenope”, Italy Marco Dell’Isola, Università degli Studi di Cassino e del Lazio Meridionale, Italy Fausto Arpino, Università degli Studi di Cassino e del Lazio Meridionale, Italy Alfonso Niro, Politecnico di Milano, Italy List of Committees, Contact details for the declaration are available in this Pdf.

The two methods are tested against a full year of data collected at <italic>Ka</italic>-band and <inline-formula> <tex-math notation="LaTeX">$Q$ </tex-math></inline-formula>-band at Politecnico di Milano, Milan, Italy, in the framework of the Alphasat Aldo Paraboni propagation experiment.

Aim: To validate a new device for noninvasive assessment of cfPWV, ATHOS (Arterial sTiffness faitHful tOol aSsessment), designed in collaboration with the Politecnico di Torino, against the reference noninvasive method represented by SphygmoCor.

In this perspective, this contribution presents first results of a research project conducted by Politecnico di Torino, which developed a tool for vulnerability and risk rapid analysis of the ecclesiastical religious heritage.

This chapter summarizes the PolimiparaRocinha research project founded by Polisocial (the social responsibility program of Politecnico di Milano) and coordinated by an international nongovernmental organization (NGO) called “Sorriso dei miei bimbi,” which has operated in Rocinha for 20 years, along with other Italian NGOs and the Federal University of Rio de Janeiro (UFRJ).

The area is located in Città studi, on the edge of the dense complex of Politecnico di Milano and the large green space Giuriati Sports Field: two areas have no spatial continuity.

Technical Program Committee Dennis Abts, Google Stu Bailey, Infoblox Pavan Balaji, Argonne National Laboratory Christian Bell, Myricom Keren Bergman, Columbia University Gil Bloch, Mellanox David Cohen, Western Digital Hans Eberle, Oracle Yashar Ganjali, University of Toronto Ada Gavrilovska, Georgia Institute of Technology Patrick Geoffray, Myricom Paolo Giaccone, Politecnico di Torino Madeleine Glick, APIC Corporation Brice Goglin, INRIA Mitchell Gusat, IBM Research Zurich Mark Hummel, AMD Pranay Koka, Oracle Sameer Kumar, IBM Research Center (Yorktown) Hong Liu, Google John Lockwood, Algo-Logic Rami Melhem, University of Pittsburgh Cyriel Minkenberg, IBM Research Zurich Mondrian Nuessle, University of Heidelberg Fabrizio Petrini, IBM T.

This paper presents the concept and design of a management system, called SiME (Sistema Museo Egizio) that the Museum conceived in collaboration with Politecnico di Milano.

Edoardo Suerra,1, 2 Dario Giannotti,2 Francesco Canella,3, 2 Stefano Capra,1 Daniele Cipriani,1, 2 Giovanni Mettivier,4, 5 Gianluca Galzerano,6, 3 Paolo Cardarelli,7 Simone Cialdi,1, 2, ∗ and Luca Serafini2 Università degli Studi di Milano Via Celoria, 16, 20133 Milano, Italy Istituto Nazionale di Fisica Nucleare Sezione di Milano Via Celoria, 16, 20133 Milano, Italy Politecnico di Milano Piazza Leonardo da Vinci, 32, 20133 Milano, Italy Università degli Studi di Napoli Federico II, Via Cintia, 21, 80126 Napoli, Italy Istituto Nazionale di Fisica Nucleare Sezione di Napoli Via Cintia, 21, 80126 Napoli, Italy Istituto di Fotonica e Nanotecnologie Consiglio Nazionale delle Ricerche, Piazza Leonardo da Vinci, 32, 20133 Milano, Italy Istituto Nazionale di Fisica Nucleare Sezione di Ferrara Via Saragat, 1, 44122 Ferrara, Italy.

This initiative led to the foundation of structured contributors groups such as PoliMappers, the first European YouthMappers chapter based in Politecnico di Milano (Italy).

In this regard, the DYNASTY experimental facility at Politecnico di Milano has been setup to increase the knowledge on single-phase, buoyancy-driven systems in the presence of distributed heating.

During the last 12 years, the 3DSurveyGroup (3DSG, Politecnico di Milano) conduced an omni-comprehensive, multi-technique survey, obtaining the complete point cloud of Milan Cathedral, from which were produced the 2D technical drawings and the 3D model of the Main Spire used by the Veneranda Fabbrica del Duomo di Milano (VFD) to plan its periodic maintenance and inspection activities on the Cathedral.

Paul,3 Giovanni Isella,4 Alfred Leitenstorfer,1 Paolo Biagioni,6 AND Daniele Brida1,2,* Department of Physics andCenter for Applied Photonics, University of Konstanz, D-78457 Konstanz, Germany Department of Physics andMaterials Science, University of Luxembourg, 162a, avenue de la Faïencerie L-1511, Luxembourg, Luxembourg School of Engineering, University of Glasgow, Rankine Building, Oakfield Avenue, Glasgow, G12 8LT, UK L-NESS, Dipartimento di Fisica del Politecnico diMilano, Via Anzani 42, 22100Como, Italy Dipartimento di Fisica, Università di Pavia, Via Agostino Bassi 6, 27100 Pavia, Italy Dipartimento di Fisica, Politecnico diMilano, Piazza Leonardo da Vinci 32, 20133Milano, Italy *Corresponding author: daniele.

—Marcelo Lubaszewki, Universidade Federal do Rio Grande do Sul —Matteo Sonza Reorda, Politecnico di Torino.

This chapter is aimed at summarizing the recent initiatives put in action for solving the problems in delivering the educational services in the Turin Polytechnic University in Tashkent, TTPU, after the lockdown, and the stringent measures taken by the Uzbek government in March 2020, for the pandemic explosion of the COVID-19 virus The long-lasting connection between Politecnico di Torino, a European University, and this Central Asia Institution has been proven to be extremely effective, maximizing the benefits of TTPU in promptly offering online solutions for remote lectures, and the preparation of the technical substrate for both the exams and admission test which will be delivered after the completion of the second semester lectures A summary of the IT tools adopted, with compact highlights of their features, as well as the qualitative feedback collected from the first courses offered with a reshaped structure suitable for online classes are thoroughly discussed in this work © 2021, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

Our analyses on the graduates who obtained a Master of Science degree in the 2005–2009 period from Politecnico di Milano reveal that training in economics and management reduces the gender imbalance in entrepreneurial entry among STEM recent graduates.

5Department of Civil and Environment Engineering, Politecnico di Milano, Milan, Italy.

Funding: None Declaration of Interest: RD reports grants and other from Restech, personal fees from Philips Healthcare, outside the submitted work; Dr Dellaca' has a patent on the detection of EFL by Forced Oscillation technique (FOT) with royalties paid to Philips Respironics and Restech Srl, a patent on monitoring lung volume recruitment by FOT with royalties paid to Vyaire, and a patent on early detection of exacerbations by home monitoring of FOT with royalties paid to Restech and is co-founder and shareholder of Restech Srl, a spin-off company of the Politecnico di Milano University producing medical devices for lung function testing based on FOT.

The study describes the teaching-learning experience and reports the results of the first pilot study, which involves about 100 undergraduate Architecture students of Politecnico di Milano.

ANCE”, 2019-2022), partnered by Politecnico di Torino, is currently in the central phase.

He has a PhD in Physics at Politecnico di Milano, in collaboration with the Italian Institute of Technology (IIT), focused on the study of energy efficient, scalable, and environmentally friendly deposition routes for lead halide perovskites.

The laboratory testing has been developed in Politecnico di Milano, at the facilities of the Centre for Sustainable Process Engineering Research (SuPER); the bench-scale tests have been performed at the Sotacarbo Sustainable Energy Centre SpA facilities and the industrial application is just started in Itelyum Regeneration Srl, an eco-refinery for exhausted oil recovery.

We describe the teaching-learning experience and the results of the first pilot study, which has involved circa 100 undergraduate Architecture students from Politecnico di Milano.

Politecnico di Milano was in charge of Publication management of this last use-cases collection.

The characterization was carried out in the secondary standard calibration laboratory of Politecnico di Milano Italy, and with a traceable radon chamber.

The case study taken for the analysis is the Politecnico di Torino, a Higher Education Institution (HEI) located in Northern Italy counting around 33,000 enrolled students in 2016.

—<italic>Marcelo Lubaszewki, Universidade Federal do Rio Grande do Sul</italic> —<italic>Matteo Sonza Reorda, Politecnico di Torino</italic>.

Different combinations are compared on a real case study: a PV facility in SolarTechLAB, in Politecnico di Milano.

Dipartimento Interateneo di Fisica, Politecnico di Bari, Via E.

An ongoing research activity at Politecnico di Torino is focused on a model-based approach able to better describe the behavior of an industrial robot in non-nominal operating conditions.

The methodology, based on the real scenario of Torino Municipality and their needs addressed in recent studies in collaboration with FULL – Future Urban Legacy Lab from Politecnico di Torino, take advantage from the availability of two test dataset at different scale, with different potential and bottlenecks.

As reported in this methodological paper, the functionality of the new ISA system was tested at the driving simulator of the Politecnico di Torino (Italy) and the resulting estimated ASD value was validated and tested successfully.