Introduction to Outstanding Adsorption

What is/are Outstanding Adsorption?

Outstanding Adsorption - By combining the outstanding adsorption capacity of l-cysteine and Nafion toward Pb(II) and Cd(II) with the advantages of SWCNs and ILs, the modified SWCNs/l-cysteine/Nafion-IL/GCE composite showed excellent detection performance, including good stability, high sensitivity and selectivity. ^[1] The outstanding adsorption property for heavy metal ions of nano HA provides evidence that the material has a great potential in application of water treatment procedure. ^[2] In spite of the outstanding adsorption properties of microporous silica and hybrid silica xerogels, the selectivity of these materials towards gases and vapours has been studied to a little extent. ^[3] This provides a valuable alternative to explore semiconductor-GA hybrids with outstanding adsorption capacity and superior visible-light induced photocatalytic activity. ^[4] Adsorption-driven heat pumps (AHPs) based on metal–organic frameworks (MOFs) have been garnering rapidly growing research interests due to their outstanding adsorption performance. ^[5] The ultra-high surface area and developed hierarchical porous structure make PDAC-4 show an outstanding adsorption capacity of 7765 mg·g-1 for Rhodamine B (2500 mg·L-1), which is several times higher than those of the adsorbents ever reported. ^[6] 98 m2 g−1) and abundant surface oxygen-containing functional group, which contribute to outstanding adsorption capabilities for Methylene Blue (MB, 316. ^[7] Considering the simple synthetic process and outstanding adsorption performance of PAMAM gel, this paper provides an effective approach to prepare high-performance anionic dye adsorbents. ^[8] These characteristics provide sites that are rich in electrostatic interaction to exhibit an outstanding adsorption capacity of lysozyme (1865 mg/g). ^[9] The outstanding adsorption capacity can be attributed to a highly interconnected porous network in the 3D architecture and a high surface-to-volume ratio. ^[10] It was found previously that neither monomer MoS2 nor WO3 is an ideal material for the adsorption of organic dyes, while MoS2/WO3 composites synthesized by a two-step hydrothermal method have outstanding adsorption effects. ^[11] Ionic liquids/metal-organic framework composites are recognized as promising adsorbents for CO2 capture due to the outstanding adsorption performance, whereas their water stability, which is critical for the real application of ILs/MOF composites, has not been taken into consideration. ^[12] The as-prepared poly(2-acrylamido-2-methyl-propanesulfonic acid-co-acrylic acid) hydrogel spheres show outstanding adsorption capabilities toward organic dyes (4625 ± 231 mg g−1 for methylene blue) and heavy metallic ions (4312 ± 185 mg g−1 for Pb(II)). ^[13] The hierarchical-pore Fe-HK-2 with high porosity, outstanding adsorption capacity, enhanced diffusion rate, and excellent reversibility might be an attractive candidate for VOCs adsorption. ^[14] 48 m2 g−1, uniform sizes of around 15–20 nm and outstanding adsorption and degradation properties. ^[15] The described microparticles exhibit an outstanding adsorption capacity for AgNPs of approximately 59. ^[16] The outstanding adsorption performances of composites for the removal of TB dye from water demonstrate its significant potential for environmental applications. ^[17] Metal-organic frameworks (MOFs) are promising adsorbents for adsorption-driven heat pumps (AHPs) due to their outstanding adsorption performance. ^[18] 31 mg g-1, a superior recyclability with 87 % of initial capacity retained after 5 cycles, and an outstanding adsorption selectivity for cesium. ^[19] The outstanding adsorption performance was attributed to the synergistic effect of the fast adsorption of β-CDP, abundant β-CDP nanoparticles and large contact area offered by spongy pores. ^[20] Among available removal techniques, adsorptive removal by nanosized materials such as metal oxide, metal organic frameworks, zeolite and carbon-based materials has attracted much attention due to the large active surface area, large number of functional groups, high chemical and thermal stability which led to outstanding adsorption performance. ^[21] Porous structure, large extent of carboxylic functional groups, cyclodextrin's preventing aggregation, and negatively charged make P-CDP-COO- possess an outstanding adsorption capability for lysozyme. ^[22] An electrochemical sensor for Pb(II) is described that exploits (a) the outstanding adsorption ability of chitosan modified with quaternary ammonium groups (CQAS; cationic) and of lignosulfonate (LSN; anionic), and (b) the good electrical conductivity of polypyrrole nanoparticles (PPy NPs). ^[23] Instead of using commercial activated carbon or ion exchange resins, researchers have worked on inexpensive materials, such as wastes from industry and agricultural operations due to their outstanding adsorption behavior toward heavy metal ions. ^[24] Combined with a grafting approach onto functionalized magnetic nanoparticles, a new and faster way to synthesize magnetic protein imprinted polymers with outstanding adsorption capacities was developed. ^[25] The use of metal-organic frameworks (MOFs) for adsorption cooling has won increasing research interests due to their outstanding adsorption performance. ^[26] The as-synthesized Al2O3@ZnO core-shell composite exhibited fast kinetics and outstanding adsorption capacity for Congo red (CR) due to its unique structure and highly porous texture, which was much superior to those of bare Al2O3 core and ZnO microspheres. ^[27] In this work, combining with the outstanding adsorption property of CNT and the effective electrocatalytic oxidation performance of β-PbO2, we constructed novel layer-by-layer carbon nanotube/PbO2 anodes (CNT/PbO2-3, CNT/PbO2-4 and CNT/PbO2-5) with high adsorbability to enhance the electrochemical degradation efficiency of low-concentration sodium pentachlorophenate (PCP Na). ^[28] The outstanding adsorption amount, short adsorption equilibrium time, and excellent removal efficiency can provide a theoretical guidance for further immobilization of U(VI) from seawater. ^[29] Herein, combined with the outstanding adsorption ability of flower-like MoS2 with ultra-thin nanosheets and the good electrical conductivity of reduced graphene oxide (rGO), a sensitive and anti-interference electrochemical sensing interface for the analysis of Pb(II) was constructed by using MoS2/rGO nanocomposite modified glassy carbon electrode (MoS2/rGO-GCE). ^[30] Through a simple one-pot crosslinking of simultaneous quaternization and Friedel-Crafts alkylation reactions, the hierarchical pyridinium-based PIP of [PPYX]Cl was fabricated, which exhibited an outstanding adsorption capacity of dibenzothiophene (DBT) of 35. ^[31] A kind of water-soluble chitosan, chitosan oligosaccharide, was used to synthesize a crosslinking hydrogel using a simple method, and the outstanding adsorption property of the hydrogel for Cr(VI) was investigated. ^[32] The magnetic characteristic and the outstanding adsorption property for heavy metal ions of Fe-doped HA nanocages provide evidence that the material has a great promise for wastewater treatment. ^[33] However, the inherent hydrophobicity and strong π-π interaction make OMCs have an advantage for the adsorption of nonpolar pollutants, leading to great demands for the development of new-type OMCs with outstanding adsorption efficiencies towards polar pollutants. ^[34] The synthesized HMONs-COOH possess the high special surface area, robust organic framework and hierarchically porous structure, which shows highly catalytic activity in the Friedel-Crafts alkylation of indole with aldehydes and outstanding adsorption efficiency toward cationic dyes. ^[35] The outstanding adsorption perfor. ^[36] The equilibrium state of static adsorption study indicated the outstanding adsorption capacity of pseudorotaxane motif MNPs toward six SAs to be 15-80 mg/g, providing much better adsorption affinity for SAs compared with MNPs only modified with amino, and their adsorption behaviors were all fitted with Freundlich adsorption isotherm model. ^[37] Hydrotalcite-like compounds are synthetic anionic clays that have outstanding adsorption and catalytic properties. ^[38] The outstanding adsorption and photocatalytic degradation performance of the rGO-MoO3 aerogel was attributed to its unique physical properties, such as high porosity, simple recycling process, high hydrophobicity, low density and excellent mechanical stability. ^[39]

specific surface area

The outstanding adsorption performance of RSAC was attributed to the high specific surface area (1403 m2 g-1) and abundant multifarious oxygenic groups which could participate in the electrostatic attraction and reduction reaction of Ag(I) and Cr(VI) during the adsorption process. ^[1] Abundant functional groups and enhanced specific surface areas endowed T-NTO nanofibers with outstanding adsorption capacity of 328. ^[2] This composite showed outstanding adsorption capacity due to the structure of 3D double network skeleton, large specific surface area, and remarkable carboxyl group content. ^[3] Due to the porous structure and large specific surface area, the produced CS-EG sponges exhibited outstanding adsorption capacity for wound exudate. ^[4] To deeply clean oily wastewater, molecular sieve residues (MSRs) were sufficiently recycled and utilized due to their high specific surface area, porous structure, and outstanding adsorption property. ^[5]

Showed Outstanding Adsorption

The g-C3N4-agar hybrid aerogel was obtained by a heating-cooling polymerization process with agar and g-C3N4 powder as the raw material, which showed outstanding adsorption properties due to its three-dimensional network structure. ^[1] This composite showed outstanding adsorption capacity due to the structure of 3D double network skeleton, large specific surface area, and remarkable carboxyl group content. ^[2] The Fe3O4@SiO2-GO@MIPs with lamellar membranes showed outstanding adsorption capacity. ^[3] The results indicated that PPy-O-CGF showed outstanding adsorption capacity, with 78. ^[4]

Exhibited Outstanding Adsorption

The resultant PAN/UiO-66-(COOH)2 NFMs with quite high UiO-66-(COOH)2 loading (up to 60 wt%) exhibited outstanding adsorption capacities and good recyclability for Ln3+ ions. ^[1] The microspheres exhibited outstanding adsorption capacity towards the removal of Pb2+ (310. ^[2] MXene exhibited outstanding adsorption of Ba2+ and Sr2+, to approximately 180 and 225 mg g-1, respectively, when 1 g L-1 MXene was admixed with adsorbates at 2 g L-1. ^[3] Due to the porous structure and large specific surface area, the produced CS-EG sponges exhibited outstanding adsorption capacity for wound exudate. ^[4]

Exhibit Outstanding Adsorption

Combined with the characterization results, we proposed that the unique structure and composition of FeCu@C enable the catalyst to exhibit outstanding adsorption capability and catalytic performance in SMT degradation by H2O2 activation. ^[1] The produced chitosan/rarasaponin/bentonite (CRB) composite exhibits outstanding adsorption capability toward copper metal ions (Cu(II)). ^[2] Due to the high pore volume provided by nanoscale ZIF-67 NPs, the as-prepared core-shell ZIF-67@HCSs exhibit outstanding adsorption capacity for CO2. ^[3]

outstanding adsorption capacity

By combining the outstanding adsorption capacity of l-cysteine and Nafion toward Pb(II) and Cd(II) with the advantages of SWCNs and ILs, the modified SWCNs/l-cysteine/Nafion-IL/GCE composite showed excellent detection performance, including good stability, high sensitivity and selectivity. ^[1] This provides a valuable alternative to explore semiconductor-GA hybrids with outstanding adsorption capacity and superior visible-light induced photocatalytic activity. ^[2] The ultra-high surface area and developed hierarchical porous structure make PDAC-4 show an outstanding adsorption capacity of 7765 mg·g-1 for Rhodamine B (2500 mg·L-1), which is several times higher than those of the adsorbents ever reported. ^[3] These characteristics provide sites that are rich in electrostatic interaction to exhibit an outstanding adsorption capacity of lysozyme (1865 mg/g). ^[4] The outstanding adsorption capacity can be attributed to a highly interconnected porous network in the 3D architecture and a high surface-to-volume ratio. ^[5] The hierarchical-pore Fe-HK-2 with high porosity, outstanding adsorption capacity, enhanced diffusion rate, and excellent reversibility might be an attractive candidate for VOCs adsorption. ^[6] Abundant functional groups and enhanced specific surface areas endowed T-NTO nanofibers with outstanding adsorption capacity of 328. ^[7] And the mGOCP-1% attained outstanding adsorption capacity for CIP (283. ^[8] 2Fe2O3@PGMs delivered outstanding adsorption capacity (59. ^[9] The described microparticles exhibit an outstanding adsorption capacity for AgNPs of approximately 59. ^[10] The resultant PAN/UiO-66-(COOH)2 NFMs with quite high UiO-66-(COOH)2 loading (up to 60 wt%) exhibited outstanding adsorption capacities and good recyclability for Ln3+ ions. ^[11] The microspheres exhibited outstanding adsorption capacity towards the removal of Pb2+ (310. ^[12] Combined with a grafting approach onto functionalized magnetic nanoparticles, a new and faster way to synthesize magnetic protein imprinted polymers with outstanding adsorption capacities was developed. ^[13] This composite showed outstanding adsorption capacity due to the structure of 3D double network skeleton, large specific surface area, and remarkable carboxyl group content. ^[14] The as-synthesized Al2O3@ZnO core-shell composite exhibited fast kinetics and outstanding adsorption capacity for Congo red (CR) due to its unique structure and highly porous texture, which was much superior to those of bare Al2O3 core and ZnO microspheres. ^[15] The Fe3O4@SiO2-GO@MIPs with lamellar membranes showed outstanding adsorption capacity. ^[16] Due to the porous structure and large specific surface area, the produced CS-EG sponges exhibited outstanding adsorption capacity for wound exudate. ^[17] Through a simple one-pot crosslinking of simultaneous quaternization and Friedel-Crafts alkylation reactions, the hierarchical pyridinium-based PIP of [PPYX]Cl was fabricated, which exhibited an outstanding adsorption capacity of dibenzothiophene (DBT) of 35. ^[18] Due to the high pore volume provided by nanoscale ZIF-67 NPs, the as-prepared core-shell ZIF-67@HCSs exhibit outstanding adsorption capacity for CO2. ^[19] Moreover, the copolymer also shows outstanding adsorption capacity to remediation of organic dye reactive black 5 (RB5), which manifests the potential application of synthesised copolymer in wastewater treatment. ^[20] The equilibrium state of static adsorption study indicated the outstanding adsorption capacity of pseudorotaxane motif MNPs toward six SAs to be 15-80 mg/g, providing much better adsorption affinity for SAs compared with MNPs only modified with amino, and their adsorption behaviors were all fitted with Freundlich adsorption isotherm model. ^[21] The results indicated that PPy-O-CGF showed outstanding adsorption capacity, with 78. ^[22]

outstanding adsorption performance

The outstanding adsorption performance of RSAC was attributed to the high specific surface area (1403 m2 g-1) and abundant multifarious oxygenic groups which could participate in the electrostatic attraction and reduction reaction of Ag(I) and Cr(VI) during the adsorption process. ^[1] Adsorption-driven heat pumps (AHPs) based on metal–organic frameworks (MOFs) have been garnering rapidly growing research interests due to their outstanding adsorption performance. ^[2] Considering the simple synthetic process and outstanding adsorption performance of PAMAM gel, this paper provides an effective approach to prepare high-performance anionic dye adsorbents. ^[3] Ionic liquids/metal-organic framework composites are recognized as promising adsorbents for CO2 capture due to the outstanding adsorption performance, whereas their water stability, which is critical for the real application of ILs/MOF composites, has not been taken into consideration. ^[4] The prepared 3-D MGB was investigated for the removal of oil from water, which demonstrated outstanding adsorption performance and excellent recyclability. ^[5] The outstanding adsorption performances of composites for the removal of TB dye from water demonstrate its significant potential for environmental applications. ^[6] Metal-organic frameworks (MOFs) are promising adsorbents for adsorption-driven heat pumps (AHPs) due to their outstanding adsorption performance. ^[7] The outstanding adsorption performance was attributed to the synergistic effect of the fast adsorption of β-CDP, abundant β-CDP nanoparticles and large contact area offered by spongy pores. ^[8] Among available removal techniques, adsorptive removal by nanosized materials such as metal oxide, metal organic frameworks, zeolite and carbon-based materials has attracted much attention due to the large active surface area, large number of functional groups, high chemical and thermal stability which led to outstanding adsorption performance. ^[9] The use of metal-organic frameworks (MOFs) for adsorption cooling has won increasing research interests due to their outstanding adsorption performance. ^[10]

outstanding adsorption property

The outstanding adsorption property for heavy metal ions of nano HA provides evidence that the material has a great potential in application of water treatment procedure. ^[1] In spite of the outstanding adsorption properties of microporous silica and hybrid silica xerogels, the selectivity of these materials towards gases and vapours has been studied to a little extent. ^[2] The g-C3N4-agar hybrid aerogel was obtained by a heating-cooling polymerization process with agar and g-C3N4 powder as the raw material, which showed outstanding adsorption properties due to its three-dimensional network structure. ^[3] In this work, combining with the outstanding adsorption property of CNT and the effective electrocatalytic oxidation performance of β-PbO2, we constructed novel layer-by-layer carbon nanotube/PbO2 anodes (CNT/PbO2-3, CNT/PbO2-4 and CNT/PbO2-5) with high adsorbability to enhance the electrochemical degradation efficiency of low-concentration sodium pentachlorophenate (PCP Na). ^[4] A kind of water-soluble chitosan, chitosan oligosaccharide, was used to synthesize a crosslinking hydrogel using a simple method, and the outstanding adsorption property of the hydrogel for Cr(VI) was investigated. ^[5] To deeply clean oily wastewater, molecular sieve residues (MSRs) were sufficiently recycled and utilized due to their high specific surface area, porous structure, and outstanding adsorption property. ^[6] The magnetic characteristic and the outstanding adsorption property for heavy metal ions of Fe-doped HA nanocages provide evidence that the material has a great promise for wastewater treatment. ^[7]